|
|
 |
|
|
|
- GENERAL
Recording Format : IEC DIS DAT Standard Part5
Number of Channel : Audio x2, Timecode x1
Recording Time : 120 minutes (T-120 tape)
Head Composition : Rotat4 ing heads
Cylinder ø30mm
Error Correction : Double Encoded Reed Solomon Code
Sampling Frequency : 44.1kHz , 48kHz, 48.048kHz
Quantization : 16bit Linear
Transfer Rate : 2.4Mbit/sec.
Emphasis : 50usec. / 15usec. Reproduce only (automatic switching)
Copy Guard : Not Provided
Motor Construction 2DD, 1 Mode Monitor
Power : Ni-Cd Battery (Sony NP-1B or equivalent)
AC Adaptor: AD-15B (Option)
Power Consumption : 13W (Recording)
Battery Life More than 2.5 hours (NP-1B)
Backup Battery Life about 2 months
Physical Dimensions : 327(W) x 108(H) x 226(D)mm
Weight : 3.2kg (w/o battery)
- MECHANICAL CHARACTERISTICS
Tape Speed : 8.15mm/sec.
Fast Wind Time : Approx. 80sec. (T-120 Tape)
Search Speed : average 100 times of play speed
- ELECTRICAL CHARACTERISTICS
R/P Frequency Response : 20Hz to 20kHz +/-0.5dB
S/N : More than 90dB
Dynamic Range : More than 90dB
Total Harmonic Distortion : Less than 0.05% (1kHz)
Channel Separation : More than 80dB (1kHz)
Wow & Flutter : Less than measurement limit (+/-0.002% WTD/peak)
Standard Recording Level : -12dB (0dB = 16bit full scale level)
Meter Display : LCD, 19 segments (level), 7seg. X8
Mic Filter : fc=20 - 300Hz (Variable), -12dB
Mic Attenuator : 15/30/0dB
- INPUT / OUTPUT CONNECTORS
Analog In/Output Reference Level : +4dBu (0dBu = 0.775Vrms)
ANALOG AUDIO INPUT XLR-3-31 type (Pin2:Hot)
MIC
Reference Input Level : -60dBu
Minimum Input Level : -70dBu
Maximum Input Level : -28dBu
Microphone Impedance : Less than 600 ohm
Input Impedance : More than 5k ohm
LINE
Reference Input Level : +4dBu
Minimum Input Level : -6dBu
Maximum Input Level : +24dBu
Input Impedance : More than 20k ohm
ANALOG AUDIO OUTPUT XLR-3-31 type (Pin2:Hot)
Reference Output Level : +4dBu
Maximum Output Level : +21dBu
Output Load Impedance : More than 600 ohm
Output Impedance : Less than 200 ohm
DIGITAL AUDIO INPUT : XLR-3-31 type
Input Format : IEC 958 Part2 (S/P DIF)
IEC 958 Part3 (AES/EBU)
automatic switching
DIGITAL AUDIO OUTPUT : XLR-3-32 type
Output Format : IEC 958 Part2 (S/P DIF)
IEC 958 Part3 (AES/EBU)
automatic switching
LTC INPUT : XLR-3-31 type (Pin2:Hot)
Format : SMPTE/EBU
Reference Input Level : 2Vp-p
Minimum Input Level : 0.25Vp-p
Input Impedance : More than 20k ohm
LTC OUTPUT : XLR-3-32 type (Pin2:Hot)
Format : SMPTE/EBU
Reference Output : 2Vp-p
Output Impedance : Less than 1k ohm
Output Load Impedance : More than 600 ohm
HEADPHONE OUTPUT : 6mm dia stereo phone jack
Load Impedance : More than 32 ohm
Maximum Output Level : 40mW (at 32 ohm)
|
|
 |
