|
|
 |
|
|
|
- PM-2 MkII
HF unit : 25mm Soft Dome
LF Unit : 200mm Aromatic Polyamide
Frequency Response : Free field ± 2dB 50Hz - 20kHz
Low Frequency Cut-Off : 40Hz (-10dB)
High Frequency Cut-Off : 22kHz (-10dB)
Amp Power : Low Frequency: 120 watts, High Frequency: 120 watts
Amp Distortion : >0.05% T.H.D. @ 50w, 6 Ohm 20Hz - 20kHz
Amp Signal to Noise : >90dB 20Hz - 30kHz , not weighted
Amp Slew Rate : 10V / µ sec
Physical Dimensions : 254w x 411h x 300d (mm)
Weight : 14.7kg
Power Requirement / Consumption : 230VAC, 50/60Hz - 120 watts
Click here for frequency chart
- PM-1 MkII
HF unit : 25mm Soft Dome
LF Unit : 160mm Aromatic Polyamide
Frequency Response : Free field ± 2dB 50Hz - 20kHz
Low Frequency Cut-Off : 38Hz (-10dB)
High Frequency Cut-Off : 23.5kHz (-10dB)
Amp Power : Low Frequency: 75 watts, High Frequency: 45 watts
Amp Distortion : <0.007% T.H.D. @ 30w, 8 Ohm 20Hz - 20kHz
Amp Signal to Noise : >93dB 20Hz - 30kHz , not weighted
Amp Slew Rate : 15V / µ sec
Physical Dimensions : 215w x 380h x 283d (mm)
Weight : 11kg
Power Requirement / Consumption : 230VAC, 50/60Hz - 58 watts
Click here for frequency chart
- PM0.5 MkII
HF unit : 20mm Soft Dome
LF Unit : 130mm Aromatic Polyamide
Frequency Response : Free field ± 2dB 50Hz - 20kHz
Low Frequency Cut-Off : 40Hz (-10dB)
High Frequency Cut-Off : 22kHz (-10dB)
Amp Power : Low Frequency: 35 watts, High Frequency: 35 watts
Amp Distortion : <0.01% T.H.D. @ 25w, 8 Ohm 20Hz - 20kHz
Amp Signal to Noise : >84dB 20Hz - 30kHz not weighted
Amp Slew Rate : 15V / µ sec
Physical Dimensions : 181w x 280h x 260d (mm)
Weight : 6.5kg
Power Requirement / Consumption : 230VAC, 50/60Hz - 40 watts
Click here for frequency chart (PM0.5 with PM0.5-Sub)
- PM0.4
Enclosure system: 2-way bass-reflex system
Drivers: 4-inch (100mm) woofer, 0.6-inch (16mm) soft dome tweeter
Impedance: 4 ohm
Freq. Response: 60Hz – 30kHz
Crossover Freq: 1.5kHz
Enclosure volume: approx. 2.8 liters
Amp Output Power: 18W (LF), 18W (HF)
Input Terminals: 6mm TRS Phone (balanced) / -16dBV
RCA Pin (unbalanced) / -10dBV
Input Impedance: 54k ohm or more
Distortion: 0.1% THD @12W 4ohm 20Hz – 20kHz
Signal to Noise Ratio: 75dB, 20Hz – 30kHz, unweighted
Physical Dimensions 114mm (W) x 220mm (H) x 190mm (D)
Net Weight 3.75kgs
Click here for frequency chart
- PM0.5-Sub MkII
LF Unit
200mm
Frequency Response
25Hz - 85Hz
Woofer Low Frequency Cut-Off
20Hz (-18dB/octave)
Woofer High Frequency Cut-Off
55Hz (-18dB/octave)
Output Low Frequency Cut-Off
120Hz (-12dB/octave)
Amp Power
110 watts
Amp Distortion
<0.002% T.H.D. @ 50w
4 Ohm 20Hz - 20kHz
Amp Signal to Noise
>80dB 22Hz - 90Hz
not weighted
Phase
Positive / negative switchable
Click here for frequency chart (PM0.5 with PM0.5-Sub)
|
|
 |
