|
|
 |
|
|
|
- Input (A&B)
Connector XLsafsR & TRS Phone combo connector
XLR Pin 1: GND, Pin 2:HOT, Pin 3: COLD
Phones Tip: HOT, Ring: NEUTRAL, Sleeve: SHIELD
- Impedance
XLR 78k ohm or more balance
Phones 20k ohm or more balance
- Maximum input level
XLR +24 dBu
Phones +13.8 dBV (+15.8 dBu balanced)
- Reference input level
XLR +4 dBu
Phone -10 dBV (-8.2 dBu balanced)
- Sensitivity
XLR 82 dB SPL @ 1 meter @ -10 dBu (volume max)
- Stereo Mode 500Hz - 2kHz band limited
pink noise input
Phones 82 dB SPL @ 1 meter @ -24 dBV (volume max)
- Stereo Mode 500Hz - 2kHz band limited
pink noise input
Common Mode Rejection Ratio 40 dB typical @ 60 Hz
- Power Output Each Power Amplifier 15W into 8 ohm @ 1kHz
@ 0.03% T.H.D. both channels driven
- Power Output Each H.P. Amplifier 10 mW into 50 ohm @ 1kHz
@ 0.06% T.H.D. both channels driven
- Frequency Response 100Hz - 20kHz
- Input Signal LED Threshold -20 dBu
- Signal to Noise Ratio 90 dB
- Physical Dimensions 483 (W) x 44 (H) x 254 (D) mm
- Weight 4.5 kgs.
(0dBV = 1 Vr.m.s, 0dBu = 0.775 Vr.m.s.)
|
|
 |
