|
|
 |
|
|
|
- RECORDING / PLAYBACK
GENERAL
Recording Media CD-R, CD-RW
Sampling Frequency / Quantization 44.1kHz / 48kHz, 16bit
44.1kHz / 48kHz / 88.2kHz / 96kHz, 24bit
File System CD-DA (CD rec/repro)
ISO9660 (CD-ROM, repro. only)
UDF ver.1.02 (CD-ROM, rec/repro)
File Format CD-DA, BWF-P
S/N 100 dB (typical)
Dynamic Rage 100 dB (typical)
Reference Level -12dBFS / -20dBFS
T.H.D. less than 0.01 % (typical)
- INPUTS/OUTPUTS
Analog Input (L/R, balanced)
Connector XLR-3-31 type x2
Input Impedance 10k ohm or more
Standard Input Level +4dBu
Maximum Input Level +24dBu
Analog Input (L/R, unbalanced)
Connector RCA pin jack x2
Input Impedance 10k ohm or more
Standard Input Level -10dBV
Maximum Input Level +10dBV
Analog Output (L/R, balanced)
Connector XLR-3-32 type x2
Loaded Impedance 10k ohm or more
Standard Output Level +4dBu
Maximum Output Level +24dBu
Analog Output (L/R, unbalanced)
Connector RCA pin jack x2
Output Impedance 10k ohm or more
Standard Output Level -10dBV
Maximum Output Level +10dBV
Phones
Connectors Ø6mm Stereo Phone Jack x1
Loaded Impedance 8ohm or higher
Maximum Output Level 100mW (32ohm)
Digital Input (balanced)
Connector XLR-3-31 type x1
Input Format IEC60958 Part2 (S/P DIF)/IEC60958 Part3 (AES/EBU)
Automatic detect
Digital Output (balanced)
Connector XLR-3-32 type x1
Output Format IEC60958 Part2 (S/P DIF)/IEC60958 Part3 (AES/EBU)
Switchable
USB (for USB Keyboard only)
Connector USB series A receptacle x1
GPI (for fader start)
Connector Ø6mm Phone Jack x1
Format Short : Start / Open : Stop
- PHYSICAL
Power requirements AC 100V – 240V, 50/60 Hz
Power consumption 14 W
Weight (without package) 4.8 kg
Max. dimensions 482 (W) x 93.5 (H) x 321 (D) mm
|
|
 |
