|
- Recording/Playback
Recording media SD card (2 slots, SDHC, 128MB~32GB)
USB port for USB storage device (USB 2.0, Hi-speed)
Sampling frequency: 44.1/48/88.2/96kHz (24bit), 44.1/48kHz (16bit)
Record format: BWF (WAV), MP3 *with future software update
ADC/DAC: 24bit Delta-Sigma modulation
Recording time: Approx. 94minutes (1GB SD card/16bit/44.1kHz/stereo)
Recording track: Stereo or Mono
Frequency response: 20Hz~20kHz ±2dB (44.1/48kHz)
20Hz~40kHz ±3dB (88.2/96kHz)
S/N (between ADC and DAC, 24bit, 48kHz):
Line 103dB or more (typical)
Mic (with Max gain) 85dB or more (typical)
Dynamic range: 103dB or more (typical)
T.H.D: Line 0.006% or less (1kHz, -1dBFS)
Mic (with Max gain) 0.01% or less (1kHz, -1dBFS)
Reference level: -12dBFS/-20dBFS (switchable)
- Input and Output
0dBu = 0.775Vrms, 0dBV = 1.0Vrms
Analog input (INPUT L, R)
Connectors: XLR 3-31, balanced (pin #2 hot), RCA pin jack, un-balanced
Nominal input level: +4dBu (XLR/ balanced), -10dBV (RCA/ un-balanced)
Maximum input level: +24dBu (-20dBFS, XLR/ balanced), +10dBV (-20dBFS, RCA/ un-balanced)
Input impedance: more than 10kW
Microphone input (MIC IN)
Connector: XLR3-31, balanced (pin #2 hot))
Nominal input level: -56 ~ -12dBu
Maximum input level: +7dBu (with Max gain)
Input impedance: more than 1.5kW
Phantom Power: P48V
Analog output (OUTPUT L, R)
Connectors: XLR 3-32, balanced (pin #2 hot), RCA pin jack, un-balanced
Nominal output level: +4dBu (XLR/ balanced), -10dBV (RCA/ un-balanced)
Maximum output level: +24dBu (-20dBFS, XLR/ balanced), +10dBV (-20dBFS, RCA/ un-balanced)
Load impedance: more than 10kW
Digital input
Connector: XLR 3-31 (pin #2 hot)
Format: IEC60958 (AES/EBU) or IEC60958 (S/P DIF) *Auto select
Digital output
Connector: XLR 3-32 (pin #2 hot)
Format:IEC60958 (AES/EBU) or IEC60958 (S/P DIF)
Headphones output
Connector: f6.3mm stereo phone jack
Maximum output: 100mW (with 32W load)
Remote
Connector: D-sub 9pin (RS-232C), D-sub 25pin (Parallel)
Foot SW
Connector:f6.3mm phone jack
USB port
Connectors: A type (Host, Keyboard), B type (for PC, USB 2.0 Hi-speed)
SD card Slots: Standard SD card slot x 2
- General
Dimensions: 482 (W) x 52 (H) x 197 (D) mm
Weight: Approx. 2.3kg (except AC adaptor)
Power requirement: DC12~24V, Standard AC adaptor included
Connector: XLR 4-32
Power consumption: Approx. 5W
|
