New RP-Series

Professional Headphones

Main Features

  • Refined Fostex proprietary Regular Phase (RP) diaphragm driver using copper foil etched polyimide film and powerful neodymium magnet
  • The maximum input level of 3000mW to comply with various professional uses
  • Offering three types with different sound characteristics; Open (T20RPmk3) for “Deep Bass”, Closed (T40RPmk3) for “Focused Bass” and Semi-Open (T50RPmk3) for “Flat and Clear” sound

New RP-Series Professional Headphones

The new RPmk3 series headphones are successors to the reputed RPmk2 series that have been used as reliable monitor headphones in many professional recording studios for more than 30 years including from the start of the T-series.  The driver unit incorporating the key Fostex proprietary Regular Phase (RP) Technology diaphragm has been refined to achieve sharper audio reproduction for more accurate monitoring.  The housing, ear pads and head pad have also been re-designed to derive the maximum performance of the RP driver.

In Detail

  • Refined Fostex proprietary Regular Phase (RP) diaphragm driver using copper foil etched polyimide film and powerful neodymium magnet
  • The maximum input level of 3000mW to comply with various professional uses
  • Offering three types with different sound characteristics; Open (T20RPmk3) for “Deep Bass”, Closed (T40RPmk3) for “Focused Bass” and Semi-Open (T50RPmk3) for “Flat and Clear” sound
  • Newly developed low repulsion ear pad and head pad for maximum comfort
  • Comes with 3m 1/4” plug detachable cable for best serviceability and 1.2m mini plug cable for portable audio use

Replacement Ear Pads and Cable

* EX-EP-RPmk3 is exclusively used for the new RPmk3 headphones. Please contact your nearest distributor or authorized service station for replacement ear pads for T20RPmk2, T40RPmk2 and T50RP.

** ET-RP3.0/1.2 can be fit to former models T20RPmk2, T40RPmk2 and T50RP.

EX-EP-RPmk3, Replacement Ear Pads (pair)*

ET-RP3.0, Replacement cable (3.0m)**

ET-RP1.2, Re placement cable (1.2m)**

Specifications

(T20RPmk3)
Driver:    Regular Phase (or Orthodynamic)
Impedance:    50 ohm
Sensitivity:    92dB (at 1kHz, 1mW)
Frequency Response:    15Hz – 35kHz
Maximum Input Power:    3000mW
Weight:    315g
Cable:    Detachable 1/4” Stereo Phone (3m) and Stereo Mini (1.2m)


(T40RPmk3)

Driver:    Regular Phase (or Orthodynamic)
Impedance:    50 ohm
Sensitivity:    91dB (at 1kHz, 1mW)
Frequency Response:    20Hz – 35kHz
Maximum Input Power:    3000mW
Weight:    315g
Cable:    Detachable 1/4” Stereo Phone (3m) and Stereo Mini (1.2m)

(T50RPmk3)
Driver:    Regular Phase (or Orthdynamic)
Impedance:    50 ohm
Sensitivity:    92dB (at 1kHz, 1mW)
Frequency Response:    15Hz – 35kHz
Maximum Input Power:    3000mW
Weight:    315g
Cable:    Detachable 1/4” Stereo Phone (3m) and Stereo Mini (1.2m)

Specifications and appearance are subject to change without notice for product improvement

Document Downloads

    Datasheet

For more document downloads, check the manuals section in Technical Support

Headphones and Microphones

New RP-Series : Professional Headphones