RM-3DT

Active Monitor Speaker

Main Features

  • Accepts Balanced Analog Input and Dante® Input.
  • Power saving design by the digital amplifier and switching power supply.
  • 26-dot LED meter indicates either of VU, VU+PEAK, VU+PEAK HOLD, PEAK+PEAK HOLD.

RM-3DT Active Monitor Speaker

Model RM-3DT is a powered rack-mount monitor with Dante* audio network function.

*Dante is a registered trademark of Audinate

In Detail

  • Accepts Balanced Analog Input and Dante® Input.
  • Power saving design by the digital amplifier and switching power supply.
  • 26-dot LED meter indicates either of VU, VU+PEAK, VU+PEAK HOLD, PEAK+PEAK HOLD.
  • The display brightness can be adjusted in four levels.
  • Outputs either or both of any 2-channel digital signals extracted from Dante® network signals.
  • Supported sampling frequencies: 44.1/48/88.2/96 kHz.
  • Physical dimensions are identical to the conventional RM-3 for easy replacement.
  • DMM (Dante Domain Manager) ready
  • AES67 compatible

Specifications

SPEAKER SECTION
Unit: 110 x 40mm rectangle cone type
Impedance: 8 ohm
Sound Pressure Level: 84dB / W (1m)
Frequency response: 200 Hz – 20k Hz

AMPLIFIER SECTION
Rated output: 10W x 2
Residual Noise:    -50dBV or less (DIN AUDIO)
Distortion (T.H.D.): less than 0.1%

INPUTS
Connector: Dante Input (RJ45), XLR-3-31 (balanced)
Analog Input Level: +4/0 dBu (balanced)
Analog Input Impedance: 10k ohm or more
THROUGH OUT
Connector: XLR-3-32 (balanced)

PHONES
Connector: 1/4” Stereo Phone
Input Impedance: 16 ohm or higher
Maximum Output Level: 20mW + 20mW (32 ohm, 1kHz)
LEVEL METER
Display: 26 dot LED x 2
Reference Level: XLR: +4/0 dBu (analog)

GENERAL
Dimensions: 482 (W) x 44 (H) x 284 (D) mm (incl. protruded parts)
Weight: approx. 3.5kg
Power Requirement: AC 100 – 240V (50/60Hz)
Power Consumption: 10W

*Dante® is a registered trademark of Audinate

Document Downloads

The following documents are available to download in Adobe Acrobat format.

    Owners Manual

    RM-3DT Dimensional Drawing

For more document downloads, check the manuals section in Technical Support

Speakers and Monitors

RM-3DT : Active Monitor Speaker

This web site uses cookies to deliver the best possible browsing experience for our visitors. If you continue using this website, we will assume that you are happy about that.