6301N Series

Active Monitor

Main Features

  • 20W D-class power amplifier for higher output level and less power consumption with no heat sink
  • Dedicated 4-inch full range driver for clear audio reproduction
  • Flat panel design to avoid inadvertent power-off or level change
  • Auto Stand-by mode (compliant to ErP directive) for energy saving

6301N Series Active Monitor

Model 6301-series have been on the market since 1982 as the standard active monitor speaker in the broadcast and production facilities and now we have re-design the speakers with the latest D-class power amplifier and new driver unit featuring energy saving “auto stand-by” function.


Dante* version (Model 6301DT)

  • Outputs either or both of any two-channel digital signals out of Dante network signals adopting Dante Ultimo chip
  • Supported sampling frequencies: 44.1/48/88.2/96kHz
  • Dante Input 1, Input 2 or Input 1+2 (mixed) can be selected by the switch on the rear panel
  • DMM (Dante Domain Manager) ready
  • AES67 compatible

*"Dante" is a registered trademark of Audinate

 

 

Options

  • EB-6301 U-Bracket
    The optional rugged EB-6301 U-Bracket for the 6301B/6301N series speakers is available providing a range of mounting options.
6301 Cutaway

In Detail

  • 20W D-class power amplifier for higher output level and less power consumption with no heat sink
  • Dedicated 4-inch full range driver for clear audio reproduction
  • Traditional rugged enclosure of aluminum die-cast with the physically identical height and width to the current B-series
  • Flat panel design to avoid inadvertent power-off or level change
  • Auto Stand-by mode (compliant to ErP directive) for energy saving
  • Detachable IEC type power inlet with multi-voltage power handling
  • Newly designed mounting bracket (EB-6301) for wall mounting with variable angle adjustments

Specifications

SPEAKER SECTION

Enclosure type:    closed
Unit:    4” full range
Frequency response:    70 Hz – 15k Hz
Sound Pressure Level:    85dB / W (1m)
Maximum SPL:    98dB

AMPLIFIER SECTION

Inputs

All Models:    Connector:    1/4” TS Phone (unbalanced)
    Input Impedance:    10k ohm or more
6301NX    Connector:    XLR-3-31 (transformer balanced)
    Input Impedance:    10k ohm or more
6301NE    Connector:    XLR-3-31 (electrically balanced)
    Input Impedance:    10k ohm or more
6301ND    Connector:    XLR-3-31 (IEC 60958 AES/EBU)
    Input Impedance:    110 ohm or more
6301DT Coonector: RJ45 (Dante)

Output (Thru)

6301ND    Connector:    XLR-3-32 (IEC 60958 AES/EBU)

Rated output:    20W
Distortion (T.H.D.):    0.05% (1kHz / 1W output)
Residual Noise:    -70dBV or less (NB/NE/NX). -65dBV (DT)
    -65dBV or less (ND)
Input Sensitivity:    1/4” TS phone:    -14dBV (0.2Vr.m.s.)
        XLR:    +4dBu (1.2Vr.m.s.)
    XLR(Digital):    -12dBFS
Auto Stand-by:        active after approx. 25 min. of continuous input lower than the threshold level

GENERAL

Dimensions:    120 (W) x 189 (H) x 120 (D) mm
Weight:    NB/NE/ND:    2.2kgs
    NX/DT    2.3kgs
Power Requirement:    AC 100 – 240V (50/60Hz)
Power Consumption:    10W (less than 0.5W in stand-by mode)

Document Downloads

The following documents are available to download in Adobe Acrobat format.

    Owners Manual 6301ND/NX/NE/NB

    Owners Manual 6301DT

    6301 & EB-6301 Dimensions Drawing

    DImension Drawing DXF Files

    Declaration of Conformity

For more document downloads, check the manuals section in Technical Support

Speakers and Monitors

6301N Series : Active Monitor

This web site uses cookies to deliver the best possible browsing experience for our visitors. If you continue using this website, we will assume that you are happy about that.